The Coral double sided edge lit light panel uses 12v Low-voltage fluorescent and is suspended on cable or rods

The A1 size CORAL light box uses mains power and T5 fluorescent tubes in conjunction with a 12v transformer.
The formulated edge lit acrylic produces even back lighting and shadow free illumination across the whole of the light box without hot spots or shadows.

With illumination coming from within the head and foot frame only, the open sides make this an attractive light box. The 12 volt power runs through the suspending cables or rod system used to suspend or wall mount the light box. The CORAL can be used to illuminate single or double sided graphics produced on white translucent film or other lightweight substrate. The print is held in place behind an anti glare protection sheet.

• Edge Lit Technology
• 20,000 hrs life
• T5 Aperture Lamps
• Silver anodised
• 85 x 45mm deep profile
• Clear sheet Front/Reverse
• Silver Anodised Aluminium
• Clear retaining clips
• Complete with 12V DC
• Transformer and 3 pin plug
• Cable or Rod system included
• CE marked
• Interior use

No minimum quantities for
off-the-shelf
standard products

We don't penalise you if you only need one item!
Unlike some companies, we don't ask you to buy more than you need.

No minimum
order charges!

Some companies have a minimum order charge of up to £100!
We don't think that's justifiable so come to us for all your
small and large orders.

Artillus Illuminating Solutions Ltd
5 Bellman Gate
Holcot Lane
Sywell
Northants NN6 0BL
England
Tel: 01604 678410
Fax: 01604 671335
International:-
Tel: ++44 1604 678410
Fax: ++44 1604 671335
E-mail: enquiries@artillus.com

Office Hours:
Mon-Fri 9.00am - 5-30pm

GraphElite™CaseLite™
Lumiwall® are registered trade marks.

Website content © 2008
Page updated December 2009
E & OE

FRAME SIZE	IMAGE SIZE	VIEW SIZE	WEIGHT	POWER
598 x 942mmm	A1 (594 x 841mm)	594 x 841mm	6.4 Kg	15.4 Watts
Thickness of Frame		45mm
Depth of Top and Bottom Frame		85mm
Surface Colour		Silver Anodised Aluminium
Frame Type		Image secured by clear front sheet and retaining clips.
Mounting Method		Cable or Rod system required

The CORAL light box is supplied complete with cable or rod suspension kit. Comprising of a pair of 1.5mm dia. x 4m long cables or a pair of 3mm dia. x 3m rod sets each with ceiling and floor fixings, light box supports, power connectors, isolators and 60va 12v transformer.

Heavy weight 3mm cables plus 6mm and 10mm diameter rods are available if required plus extra lengths for additional cost.

Available in 3 standard sizes: A3, A1 and A0.

A1 Single/Double sided Coral
Complete with 1.5mm x 4m floor to ceiling CABLE system
1-9 £443.30 each
Backlit Film Print £40.00 each

Complete with 3mm x 3m floor to ceiling ROD system
1-9 £465.15 each
Backlit Film Print £40.00 each

The above prices are for single units, discounts are available for quantities of 10 or more.
Prices exclude VAT and Del.

Custom made to order 5 -10 working days.